About this item

1：HD：2x200MP(1920*1080P)，H264
2：Audio:Two-way audio, built-in microphone and speaker, supports monitoring and intercom
3: Sensor: 2 HD image sensors
4: Lens: 2 4mm lenses, supporting 3x digital zoom
5: Night vision: supports dual light sources, supports full-color night vision,
6: AP hotspot: supports AP hotspot mode, which can be monitored through mobile phone without network
7: TF card storage: supports 4G-128G TF Card, supports mobile phone video playback
8: Video file download: support mobile APP download
9: Security access management: the system defaults the first user as the administrator, and other users must be authorized by the administrator before accessing the camera
10: APP: Support Android, IOS

Pan 360° Tilt 90° & Positioning Cruise

The PTZ camera supports horizontal rotation of 360 °, vertical rotation of 90 °, can be controlled remotely through APP
PTZ Camera support cruise, support fixed-point cruise, horizontal cruise, vertical cruise, can ensure that the monitoring of no blind spot, to protect your safety

Lens: 2 4mm lenses, supporting 3x digital zoom

Dual Lens Dual Screen Display

A dual-lens camera, equivalent to a gun camera plus a PTZ dome camera, has two separate screens, no blind spots, better protection for your safety.

Ai Human Detection & Motion Detection Alarm

The Wifi camera supports human detection, if it detects a person it will automatically alarm you and push a message to your cell phone through the APP to protect your safety. The Wifi camera also supports email alerts

Color Night Vision & IR Night Vision

The wifi surveillance camera supports night vision and infrared night vision modes as well as full color mode, and supports timed white light (to ensure that the camera video is clearer when it's dark).

IP66 Waterproof

The camera case is made of high-quality ABS plastic, which is waterproof, sun-proof and dust-proof. It is suitable for any environment.For example, indoor rooms, streets, yards, garages, gardens, etc.

Auto Tracking

The camera supports auto-tracking function, when the camera locks on the target, it will track the movement of the target and move, you can better monitor the target

2 Ways Audio & Live Call

The camera supports two-way voice, built-in microphone and speaker, when you need real-time intercom, you can open the intercom settings through the APP to realize free calls

System

Main Processor：2 multi-core high-speed processors
Number of image sensors：2 HD image sensors
Image Compression：H.264

Lens

Number of lenses：2 lenses
Lens parameters：Focal length: 4mm, 2MP
Angle of View：Horizontal: 80°, Vertical: 58°, Diagonal: 110°

Video

video channel：Support simultaneous output of two channels of video
Resolution：1080P(1920*1080P), VGA(480*360)
Image Frame Rate：15fps
Automatic Exposure：Adjust the image automatically to view clearly
IR-Cut：Built-in IR Cut, no color deviation indoor or outdoor
Zoom：App supports 3x digital zoom

Record

Record Mode：Manual recording, all-day recording, alarm recording, scheduled recording;
Record Standard：1080P(1920*1080), VGA(480*360)
Storage：Supports up to 128G TF card storage and supports mobile phone local storage
Playback：Support remote video playback

How to setup microSD card record settings

SD card installation video：https://www.youtube.com/embed/nbpofPlUV2k

Note: Cameras maximum support 128 GB SD card.

1). Remove power cable before inserting the microSD card to the camera.

2). MicroSD card format and record setting

Log in “SriHome” App and follow the steps:Settings -> Record Setting .

There are 2 types of recordings：

24/7 recording: 24/7 recording refers to the continuous recording of the camera which is about every 10 minutes as a node continuous recording.

Alarm recording: The camera captures footage only when the motion detection alarm is activated.

The system does not detect SD Card.

Followings are a few possible reasons why this may be occurring:

1. Please power off camera before inserting SD card into camera.

2. The SD card read&write speed not good, please use a SD card with class 10 or above class 10.

4. The SD card is broken.

3. The SD card has not been formatted properly.

5. The SD card slot is faulty.

SD card video playback view:

Note:Both 24/7 recording and Alarm recording cannot be opened at the same time ,only one of them can be opened.

The system does not detect an SD Card

1. Please power off camera before inserting SD card into camera.

2. The SD card read&write speed not good, please use a SD card with class 10 or above class 10.

3. The SD card is broken.

4. The SD card has not been formatted properly. please format sd www.sricam.com/srihome/download

5. The SD card slot is malfunctioning.

Camera's Wi-Fi is unstable and often offline

1. Check whether antenna is tightened.

2. Set maximum transmission power:In some wireless routers, the transmission power can be reduced,which reduces the performance

of the wireless network. Make sure your wireless router has the maximum transmit power set.

3. WiFi channels: check if WiFi channels are busy, possibly reconfigure to “Automatic”.

4. The camera IP address conflicts with other devices, needing to set camera IP address to be a

fixed one.

5. Change the name of the wireless network (SSID): If there are different wireless networks with the same name (SSID) in your

environment-perhaps because a neighbor uses the same wireless router,a wireless repeater has the same name as the router - WLAN

devices could try to automatically connect to the wrong wireless network ,Therefore, set up a unique wireless network name in your

wireless router or repeater.

6. To check Wi-Fi signal, in normally, it should be more than 3 bars.

(The distance between the camera and wifi router being too far might cause wifi signal to be less than 3 bars ).

Can't connect WiFi

If you fail to setting WiFi for ip camera, please make sure your router：

1. All IP Cameras support 2.4G HZ WIFI，only some IP cameras don't support 5GHZ Wi-Fi.

2. NO MAC filter enabled on your router. Or you need to disable MAC filter temporarily before successfully configuring camera.

3. Router’s DHCP is enabled, after setting up and setting a fixed ip address for IP camera, you can disable DHCP again.

4. The WiFi Encryption is WPA/WPA2-PSK, either AES or TKIP encryption is OK if you are not using WPA/WPA2.

There is possible using WEP. It is recommended to use WPA/WPA2 now because WEP is quite old technology and not safe nowadays.

5. WiFi Channel needs to set as AUTO in order to avoid busy channels.

Inconsistent signal, it could be due to:

1) Too many devices sharing the same internet network. Please try to disconnect other devices.

2) The IP camera is too far from the router if using WIFI connection.

• Other quality and setup issue, please reset camera to factory default.

How to restore the camera to factory settings?

Step 1: Power on the IP Camera and wait for about 30 seconds

Step 2: Keep pressing the RESET button for about 15 seconds then release.

Then camera successfully restore to factory settings (password default : 888888).