Tuya Access Control Keypad BLE Standalone Fingerprint Metal Waterproof Backlight Wall Embedded Door Opener RFID Reader+M165 box
Tuya Access Control Keypad BLE Standalone Fingerprint Metal Waterproof Backlight Wall Embedded Door Opener RFID Reader+M165 box
SPECIFICATIONS
Brand Name: Asia-Teco
Hign-concerned Chemical: None
Origin: Mainland China
Model Number: EF4-EM-W-tuya
Certification: CE
Smart home platform: Tuya
User Capacity: 1000 Cards/PINS
Normal Users: 990
Visitor Users: 10
Operating Voltage: 9~18VDC
Idle Current: <60mA
Active Current: <150mA
PIN Length: 4~6 digits
Proximity Card Reader: EM
Radio Technology: 125KHz EM Card
Read Range: 2-6 cm
Wiring Connections: Relay output, exit button, Wiegand input/output
Relay: One (NO,NC, Common)
Adjustable Relay Output Time: 0-99 Seconds (5 seconds default)
Lock Output Load: 2 Amp Maximum
PIN Output: 4 bits,8bits (ASCII),10 digits Virtual Number (Factory default:4bits)
Environment: Outdoor (IP66)
Operating Temperature: -30°C-60°C(-22°F-140°F)
Operating Humidity: 10%RH-90%RH
Physical: Stainless Steel Plate
Color: Silver & Black
imensions: 165x48x22mm
Unit Weight: 138g
Shipping Weight: 198g
Introduction
The device is Touch Key Access Controller single door multifunction standalone access controller or a Wiegand output reader with Bluetooth-enabled.People can install the Bluetooth APP to easily access the door with their smart phone.The APP supports 100 mobile users, and can manage 255 users (Fingerprint /PIN/Card)maximum by the APP.
It's compatible with both i0S (7.0 above) and Android (4.3 above) basing on Bluetooth version 4.0 above.
it uses Atmel MCU assuring stable perfommance.The operation is very user-friendly, and low-power circuit makes it long service life.
The device supports 1,000 users, all user data can be transferred from one to another (except fingerprint users). lt supports multi access modes in card access, PIN access, fingerprint access, card + PIN accessor multi cards/PINs/ fingerprints access. lt has extra features including block enrollment, Wiegand input & output interface...etc.
Features
>Capacitive fingerprint sensor, Touch key>Metal case, anti-vandal, embedded design
>Waterproof, conforms to lP66
>One relay,1,000 users (990 common + 10 visitor)
> PIN length: 4-6 digits
>Card type:125KHz EM Card
>Can be used as Wiegand reader with buzzer output
>Card block enrollment
>Tri-color LED status display
>Pulse mode, Toggle mode
>User data can be transferred (except fingerprint users)>Backlit keypad, can set automatic OFF after 20 seconds
Wiegand Interface Wiegand 26~44 bits input & output (Factory default: Wiegand 26bits)